Dust, powder & slurry
Dome valves
On/off isolation and discharge for dry powder, ash and other bulk solids.
View productMETALLURGICAL VALVES
Control the flow.
Match the duty.
Valve solutions for gas isolation, flow control, dust handling and plant utilities.
Discuss your requirementsTHE APPLICATION
A product range
for demanding duties.
Metallurgical service combines demanding media with frequent operation and challenging temperatures. Valve selection starts with the actual duty, from the sealing arrangement to the actuator and control interface.
Browse individual valve families below. Each product page identifies the application and the information needed for a project specification.
EQUIPMENT GALLERY
A closer look
at the equipment.
Select an image to open the full view. Use the arrows to browse the gallery.
View image
Dome valves
On/off isolation and discharge for dry powder, ash and other bulk solids.
View image
Flue gas dampers
Duct shut-off and flow routing in flue gas treatment systems.
View image
Wear-resistant slurry valves
Isolation for solid-bearing liquids, slurry and process water duties.
View image
Metal-seated hemispherical valves
Rotary isolation for ash and abrasive solids handling.
PRODUCT RANGE
Find the equipment
for your application.
Explore product details and send your operating requirements to our team.
Showing 19 products
Flue gas & utilities
Flue gas dampers
Duct shut-off and flow routing in flue gas treatment systems.
View productDust, powder & slurry
Wear-resistant slurry valves
Isolation for solid-bearing liquids, slurry and process water duties.
View productDust, powder & slurry
Metal-seated hemispherical valves
Rotary isolation for ash and abrasive solids handling.
View product
Flue gas & utilities
Hydraulically controlled check valves
Controlled check and closing functions for water system pipelines.
View product
Flue gas & utilities
Oxygen service valves
Isolation with materials, cleaning and operating limits specified for oxygen service.
View product
Furnace & recovery gas
Gas pressure-regulating valve groups
Coordinated throttling assemblies for furnace gas pressure control.
View product
Dust, powder & slurry
Ceramic ball valves
Wear-resistant valve internals for abrasive process media.
View product
Furnace & recovery gas
Water-sealed check valves
Reverse-flow isolation in gas systems using the specified water-seal arrangement.
View product
Gas isolation
Three-point electric goggle valves
Mechanical line isolation using a switching blind and open section.
View product
Gas isolation
Enclosed hydraulic goggle valves
Enclosed gas-line isolation with hydraulic operation and coordinated clamping.
View product
Gas isolation
Enclosed electric goggle valves
Enclosed gas-line isolation with electric actuation.
View product
Dust, powder & slurry
Pulverised coal injection valves
Isolation and switching duties in pulverised coal injection systems.
View product
Furnace & recovery gas
Three-way gas switching valves
Flow routing and switching in metallurgical gas recovery systems.
View product
Gas isolation
Ball valves
Gas-line isolation with seats and materials selected for the medium.
View product
Furnace & recovery gas
Cup valves
Dedicated valve assemblies for converter gas recovery duties.
View product
Gas isolation
Multilayer metal-seated butterfly valves
Metal-seated isolation and control for metallurgical gas service.
View product
Furnace & recovery gas
Fixed pipeline valve groups
Integrated valve assemblies for defined coke-oven gas pipeline duties.
View productNo matching products.
Try a different product name or reset the application filter.
TECHNOLOGY & SCOPE
Specify the duty.
Then the details.
Each package needs to fit the process, site conditions and operating requirements.
01
Sealing & isolation
Identify the required isolation or regulating function, differential pressure and leakage acceptance criteria.
02
Materials & wear
Match the body, trim, seals and wear surfaces to the medium, temperature, particles and operating cycle.
03
Actuation & control
Define manual or powered operation, utilities, fail position, feedback signals and interlocks.
04
Installation interfaces
Confirm connections, dimensions, orientation, support and access for inspection or replacement.
DEFINE THE DUTY
A useful enquiry
starts here.
Share the operating conditions and project interfaces so the equipment scope can be discussed clearly.
Send your requirements- Medium, composition and solids content
- Line size, connection standard and face-to-face dimensions
- Normal, design and shut-off pressure / temperature
- Isolation or regulating duty and leakage requirement
- Actuator, utilities, fail position and cycle frequency
- Installation drawings, orientation and control signals
LET’S TALK ABOUT YOUR PROJECT